 |
TYPE A-Plain:
Letters have no installation hardware supplied.
|
|
 |
TYPE D-Pad:
Letters have plastic pads
on the rear of the letters to be used with
silicone adhesive to secure to mounting
surface. Letter 12" and over come with pads that
are adjustable for leveling on irregular
surfaces, smaller sizes come with permanently fixed pads..
|
|
 |
TYPE B-Flange:
Letters have a flat 3/16"
to 7/16" perimeter on the back edge of the
letter return. If a wider flange is preferred,
specify with order. Flanges not recommended for 6
and smaller letters as well as some 8" styles.
|
|
 |
TYPE E-Combination Top:
Letters have a
combination of pads and studs on top while
having pads only on the bottom of each letter.
Recommendations and restrictions for TYPE C and TYPE D mountings apply.
|
|
 |
TYPE C-Stud:
Letters are provided with
metal studs on the rear of the letters. Specify
length of studs - 1,2,3,4,5 or 6 inch lengths
and whether studs need to be in-line for brick
or block walls. Mounting templates are required for this installation.
|
|
 |
TYPE F-Combination All:
Letters have a
pad and stud combination on both top and bottom
of each letter. Recommendations and restrictions
for TYPE C and TYPE D mountings apply.
|
|
